The display and throttle are key control components of the KuKirin G3 electric scooter. The display shows important riding information such as speed, battery level, mileage, and settings, while the throttle controls acceleration during riding.
This tutorial demonstrates how to replace the display and throttle on the KuKirin G3. If the display is damaged, not showing information correctly, or the throttle is loose, broken, or unresponsive, replacing these parts can help restore normal control and riding function.
Before starting the replacement, make sure the scooter is powered off and placed on a stable surface. Carefully remove the old display and throttle from the handlebar area, disconnect the wiring connectors, and check the cable routing before installation. Then install the new KuKirin G3 display and throttle in the correct position and reconnect all wiring securely.
After installation, power on the scooter and check that the display works normally. Test the throttle response in a safe open area before riding, and make sure all cables are fixed properly and do not interfere with steering.
Watch the full video tutorial below to learn how to replace the display and throttle on your KuKirin G3 step by step.
KuKirin G3 Throttle:
https://kukirinprime.com/products/kukirin-g3-throttle
KuKirin G3 Display (A):
https://kukirinprime.com/products/kukirin-g3-display-a
KuKirin G3 Display (C):
https://kukirinprime.com/products/kukirin-g3-display-c
KuKirin parts & accessories:
https://kukirinprime.com/collections/all-kukirin-spare-parts-accessories
